DOME2d_initialization.F90

!> Initialization of the 2D DOME experiment with density water initialized on a coastal shelf.
module dome2d_initialization
 
! This file is part of MOM6. See LICENSE.md for the license.
 
use mom_ale_sponge, only : ale_sponge_cs, set_up_ale_sponge_field, initialize_ale_sponge
use mom_dyn_horgrid, only : dyn_horgrid_type
use mom_error_handler, only : mom_mesg, mom_error, fatal
use mom_file_parser, only : get_param, log_version, param_file_type
use mom_get_input, only : directories
use mom_grid, only : ocean_grid_type
use mom_sponge, only : sponge_cs, set_up_sponge_field, initialize_sponge
use mom_unit_scaling, only : unit_scale_type
use mom_variables, only : thermo_var_ptrs
use mom_verticalgrid, only : verticalgrid_type
use mom_eos, only : calculate_density, calculate_density_derivs, eos_type
use regrid_consts, only : coordinatemode, default_coordinate_mode
use regrid_consts, only : regridding_layer, regridding_zstar
use regrid_consts, only : regridding_rho, regridding_sigma
 
implicit none ; private
 
#include <MOM_memory.h>
 
! Public functions
public dome2d_initialize_topography
public dome2d_initialize_thickness
public dome2d_initialize_temperature_salinity
public dome2d_initialize_sponges
 
! A note on unit descriptions in comments: MOM6 uses units that can be rescaled for dimensional
! consistency testing. These are noted in comments with units like Z, H, L, and T, along with
! their mks counterparts with notation like "a velocity [Z T-1 ~> m s-1]".  If the units
! vary with the Boussinesq approximation, the Boussinesq variant is given first.
 
character(len=40) :: mdl = "DOME2D_initialization" !< This module's name.
 
contains
 
!> Initialize topography with a shelf and slope in a 2D domain
subroutine dome2d_initialize_topography( D, G, param_file, max_depth )
  type(dyn_horgrid_type),  intent(in)  :: g !< The dynamic horizontal grid type
  real, dimension(G%isd:G%ied,G%jsd:G%jed), &
                           intent(out) :: d !< Ocean bottom depth in the units of depth_max
  type(param_file_type),   intent(in)  :: param_file !< Parameter file structure
  real,                    intent(in)  :: max_depth !< Maximum ocean depth in arbitrary units
 
  ! Local variables
  integer :: i, j
  real    :: x, bay_depth, l1, l2
  real    :: dome2d_width_bay, dome2d_width_bottom, dome2d_depth_bay
  ! This include declares and sets the variable "version".
# include "version_variable.h"
 
  call log_version(param_file, mdl, version, "")
  call get_param(param_file, mdl, "DOME2D_SHELF_WIDTH", dome2d_width_bay, &
                 'Width of shelf, as fraction of domain, in 2d DOME configuration.', &
                 units='nondim',default=0.1)
  call get_param(param_file, mdl, "DOME2D_BASIN_WIDTH", dome2d_width_bottom, &
                 'Width of deep ocean basin, as fraction of domain, in 2d DOME configuration.', &
                 units='nondim',default=0.3)
  call get_param(param_file, mdl, "DOME2D_SHELF_DEPTH", dome2d_depth_bay, &
                 'Depth of shelf, as fraction of basin depth, in 2d DOME configuration.', &
                 units='nondim',default=0.2)
 
  ! location where downslope starts
  l1 = dome2d_width_bay
 
  ! location where downslope reaches maximum depth
  l2 = 1.0 - dome2d_width_bottom
 
  bay_depth = dome2d_depth_bay
 
  do j=g%jsc,g%jec ; do i=g%isc,g%iec
 
    ! Compute normalized zonal coordinate
    x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
 
    if ( x <= l1 ) then
      d(i,j) = bay_depth * max_depth
    elseif (( x > l1 ) .and. ( x < l2 )) then
      d(i,j) = bay_depth * max_depth + (1.0-bay_depth) * max_depth * &
               ( x - l1 ) / (l2 - l1)
    else
      d(i,j) = max_depth
    endif
 
  enddo ; enddo
 
end subroutine dome2d_initialize_topography
 
!> Initialize thicknesses according to coordinate mode
subroutine dome2d_initialize_thickness ( h, G, GV, US, param_file, just_read_params )
  type(ocean_grid_type),   intent(in)  :: g  !< Ocean grid structure
  type(verticalgrid_type), intent(in)  :: gv !< Vertical grid structure
  type(unit_scale_type),   intent(in)  :: us !< A dimensional unit scaling type
  real, dimension(SZI_(G),SZJ_(G),SZK_(GV)), &
                           intent(out) :: h           !< The thickness that is being initialized [H ~> m or kg m-2].
  type(param_file_type),   intent(in)  :: param_file  !< A structure indicating the open file
                                                      !! to parse for model parameter values.
  logical,       optional, intent(in)  :: just_read_params !< If present and true, this call will
                                                      !! only read parameters without changing h.
 
  ! Local variables
  real :: e0(szk_(gv))     ! The resting interface heights, in depth units [Z ~> m], usually
                           ! negative because it is positive upward.
  real :: eta1d(szk_(gv)+1)! Interface height relative to the sea surface
                           ! positive upward, in depth units [Z ~> m].
  integer :: i, j, k, is, ie, js, je, nz
  real    :: x
  real    :: delta_h
  real    :: min_thickness
  real    :: dome2d_width_bay, dome2d_width_bottom, dome2d_depth_bay
  logical :: just_read    ! If true, just read parameters but set nothing.
  character(len=40) :: verticalcoordinate
 
  is = g%isc ; ie = g%iec ; js = g%jsc ; je = g%jec ; nz = g%ke
 
  just_read = .false. ; if (present(just_read_params)) just_read = just_read_params
 
  if (.not.just_read) &
    call mom_mesg("MOM_initialization.F90, DOME2d_initialize_thickness: setting thickness")
 
  call get_param(param_file, mdl,"MIN_THICKNESS",min_thickness, &
                 default=1.e-3, units="m", do_not_log=.true., scale=us%m_to_Z)
  call get_param(param_file, mdl,"REGRIDDING_COORDINATE_MODE", verticalcoordinate, &
                 default=default_coordinate_mode, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_SHELF_WIDTH", dome2d_width_bay, &
                 default=0.1, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_BASIN_WIDTH", dome2d_width_bottom, &
                 default=0.3, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_SHELF_DEPTH", dome2d_depth_bay, &
                 default=0.2, do_not_log=.true.)
 
  if (just_read) return ! All run-time parameters have been read, so return.
 
  ! WARNING: this routine specifies the interface heights so that the last layer
  !          is vanished, even at maximum depth. In order to have a uniform
  !          layer distribution, use this line of code within the loop:
  !          e0(k) = -G%max_depth * real(k-1) / real(nz)
  !          To obtain a thickness distribution where the last layer is
  !          vanished and the other thicknesses uniformly distributed, use:
  !          e0(k) = -G%max_depth * real(k-1) / real(nz-1)
  do k=1,nz
    e0(k) = -g%max_depth * real(k-1) / real(nz)
  enddo
 
  select case ( coordinatemode(verticalcoordinate) )
 
    case ( regridding_layer, regridding_rho )
 
      do j=js,je ; do i=is,ie
        eta1d(nz+1) = -g%bathyT(i,j)
        do k=nz,1,-1
          eta1d(k) = e0(k)
          if (eta1d(k) < (eta1d(k+1) + gv%Angstrom_Z)) then
            eta1d(k) = eta1d(k+1) + gv%Angstrom_Z
            h(i,j,k) = gv%Angstrom_H
          else
            h(i,j,k) = gv%Z_to_H * (eta1d(k) - eta1d(k+1))
          endif
        enddo
 
        x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
        if ( x <= dome2d_width_bay ) then
          h(i,j,1:nz-1) = gv%Angstrom_H
          h(i,j,nz) = gv%Z_to_H * dome2d_depth_bay * g%max_depth - (nz-1) * gv%Angstrom_H
        endif
 
      enddo ; enddo
 
 !  case ( IC_RHO_C )
 !
 !    do j=js,je ; do i=is,ie
 !       eta1D(nz+1) = -G%bathyT(i,j)
 !       do k=nz,1,-1
 !         eta1D(k) = e0(k)
 !         if (eta1D(k) < (eta1D(k+1) + min_thickness)) then
 !           eta1D(k) = eta1D(k+1) + min_thickness
 !           h(i,j,k) = GV%Z_to_H * min_thickness
 !         else
 !           h(i,j,k) = GV%Z_to_H * (eta1D(k) - eta1D(k+1))
 !         endif
 !       enddo
 !
 !       x = G%geoLonT(i,j) / G%len_lon
 !       if ( x <= dome2d_width_bay ) then
 !         h(i,j,1:nz-1) = GV%Z_to_H * min_thickness
 !         h(i,j,nz) = GV%Z_to_H * (dome2d_depth_bay * G%max_depth - (nz-1) * min_thickness)
 !       endif
 !
 !    enddo ; enddo
 
    case ( regridding_zstar )
 
      do j=js,je ; do i=is,ie
        eta1d(nz+1) = -g%bathyT(i,j)
        do k=nz,1,-1
          eta1d(k) = e0(k)
          if (eta1d(k) < (eta1d(k+1) + min_thickness)) then
            eta1d(k) = eta1d(k+1) + min_thickness
            h(i,j,k) = gv%Z_to_H * min_thickness
          else
            h(i,j,k) = gv%Z_to_H * (eta1d(k) - eta1d(k+1))
          endif
        enddo
      enddo ; enddo
 
    case ( regridding_sigma )
      do j=js,je ; do i=is,ie
        h(i,j,:) = gv%Z_to_H*g%bathyT(i,j) / nz
      enddo ; enddo
 
    case default
      call mom_error(fatal,"dome2d_initialize: "// &
      "Unrecognized i.c. setup - set REGRIDDING_COORDINATE_MODE")
 
  end select
 
end subroutine dome2d_initialize_thickness
 
 
!> Initialize temperature and salinity in the 2d DOME configuration
subroutine dome2d_initialize_temperature_salinity ( T, S, h, G, GV, param_file, &
                     eqn_of_state, just_read_params)
  type(ocean_grid_type),                     intent(in)  :: g !< Ocean grid structure
  type(verticalgrid_type),                   intent(in)  :: gv !< The ocean's vertical grid structure.
  real, dimension(SZI_(G),SZJ_(G), SZK_(G)), intent(out) :: t !< Potential temperature [degC]
  real, dimension(SZI_(G),SZJ_(G), SZK_(G)), intent(out) :: s !< Salinity [ppt]
  real, dimension(SZI_(G),SZJ_(G), SZK_(G)), intent(in)  :: h !< Layer thickness [H ~> m or kg m-2]
  type(param_file_type),                     intent(in)  :: param_file !< Parameter file structure
  type(eos_type),                            pointer     :: eqn_of_state !< Equation of state structure
  logical,       optional, intent(in)  :: just_read_params !< If present and true, this call will
                                                      !! only read parameters without changing T & S.
 
  ! Local variables
  integer   :: i, j, k, is, ie, js, je, nz
  real      :: x
  integer   :: index_bay_z
  real      :: delta_s, delta_t
  real      :: s_ref, t_ref;        ! Reference salinity and temperature within surface layer
  real      :: s_range, t_range;    ! Range of salinities and temperatures over the vertical
  real      :: xi0, xi1
  logical :: just_read    ! If true, just read parameters but set nothing.
  character(len=40) :: verticalcoordinate
  real    :: dome2d_width_bay, dome2d_width_bottom, dome2d_depth_bay
 
  is = g%isc ; ie = g%iec ; js = g%jsc ; je = g%jec ; nz = g%ke
 
  just_read = .false. ; if (present(just_read_params)) just_read = just_read_params
 
  call get_param(param_file, mdl,"REGRIDDING_COORDINATE_MODE", verticalcoordinate, &
                 default=default_coordinate_mode, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_SHELF_WIDTH", dome2d_width_bay, &
                 default=0.1, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_BASIN_WIDTH", dome2d_width_bottom, &
                 default=0.3, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_SHELF_DEPTH", dome2d_depth_bay, &
                 default=0.2, do_not_log=.true.)
  call get_param(param_file, mdl,"S_REF",s_ref,'Reference salinity',units='1e-3', &
                fail_if_missing=.not.just_read, do_not_log=just_read)
  call get_param(param_file, mdl,"T_REF",t_ref,'Refernce temperature',units='C', &
                fail_if_missing=.not.just_read, do_not_log=just_read)
  call get_param(param_file, mdl,"S_RANGE",s_range,'Initial salinity range', &
                units='1e-3', default=2.0, do_not_log=just_read)
  call get_param(param_file, mdl,"T_RANGE",t_range,'Initial temperature range', &
                units='1e-3', default=0.0, do_not_log=just_read)
 
  if (just_read) return ! All run-time parameters have been read, so return.
 
  t(:,:,:) = 0.0
  s(:,:,:) = 0.0
 
  ! Linear salinity profile
 
  select case ( coordinatemode(verticalcoordinate) )
 
    case ( regridding_zstar, regridding_sigma )
 
      do j=js,je ; do i=is,ie
        xi0 = 0.0
        do k = 1,nz
          xi1 = xi0 + (gv%H_to_Z * h(i,j,k)) / g%max_depth
          s(i,j,k) = 34.0 + 0.5 * s_range * (xi0 + xi1)
          xi0 = xi1
        enddo
      enddo ; enddo
 
    case ( regridding_rho )
 
      do j=js,je ; do i=is,ie
        xi0 = 0.0
        do k = 1,nz
          xi1 = xi0 + (gv%H_to_Z * h(i,j,k)) / g%max_depth
          s(i,j,k) = 34.0 + 0.5 * s_range * (xi0 + xi1)
          xi0 = xi1
        enddo
        x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
        if ( x <= dome2d_width_bay ) then
          s(i,j,nz) = 34.0 + s_range
        endif
      enddo ; enddo
 
    case ( regridding_layer )
 
      delta_s = s_range / ( g%ke - 1.0 )
      s(:,:,1) = s_ref
      do k = 2,g%ke
        s(:,:,k) = s(:,:,k-1) + delta_s
      enddo
 
    case default
      call mom_error(fatal,"dome2d_initialize: "// &
      "Unrecognized i.c. setup - set REGRIDDING_COORDINATE_MODE")
 
  end select
 
  ! Modify salinity and temperature when z coordinates are used
  if ( coordinatemode(verticalcoordinate) == regridding_zstar ) then
    index_bay_z = nint( dome2d_depth_bay * g%ke )
    do j = g%jsc,g%jec ; do i = g%isc,g%iec
      x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
      if ( x <= dome2d_width_bay ) then
        s(i,j,1:index_bay_z) = s_ref + s_range; ! Use for z coordinates
        t(i,j,1:index_bay_z) = 1.0;             ! Use for z coordinates
      endif
    enddo ; enddo ! i and j loops
  endif ! Z initial conditions
 
  ! Modify salinity and temperature when sigma coordinates are used
  if ( coordinatemode(verticalcoordinate) == regridding_sigma ) then
    do i = g%isc,g%iec ; do j = g%jsc,g%jec
      x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
      if ( x <= dome2d_width_bay ) then
        s(i,j,1:g%ke) = s_ref + s_range;    ! Use for sigma coordinates
        t(i,j,1:g%ke) = 1.0;                ! Use for sigma coordinates
      endif
    enddo ; enddo
  endif
 
  ! Modify temperature when rho coordinates are used
  t(g%isc:g%iec,g%jsc:g%jec,1:g%ke) = 0.0
  if (( coordinatemode(verticalcoordinate) == regridding_rho ) .or. &
      ( coordinatemode(verticalcoordinate) == regridding_layer )) then
    do i = g%isc,g%iec ; do j = g%jsc,g%jec
      x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
      if ( x <= dome2d_width_bay ) then
        t(i,j,g%ke) = 1.0
      endif
    enddo ; enddo
  endif
 
end subroutine dome2d_initialize_temperature_salinity
 
!> Set up sponges in 2d DOME configuration
subroutine dome2d_initialize_sponges(G, GV, tv, param_file, use_ALE, CSp, ACSp)
  type(ocean_grid_type),   intent(in) :: g !< Ocean grid structure
  type(verticalgrid_type), intent(in) :: gv !< Vertical grid structure
  type(thermo_var_ptrs),   intent(in) :: tv !< Thermodynamics structure
  type(param_file_type),   intent(in) :: param_file !< Parameter file structure
  logical,                 intent(in) :: use_ale !< If true, indicates model is in ALE mode
  type(sponge_cs),         pointer    :: csp !< Layer-mode sponge structure
  type(ale_sponge_cs),     pointer    :: acsp !< ALE-mode sponge structure
  ! Local variables
  real :: t(szi_(g),szj_(g),szk_(g))   ! A temporary array for temp [degC]
  real :: s(szi_(g),szj_(g),szk_(g))   ! A temporary array for salt [ppt]
  real :: rho(szi_(g),szj_(g),szk_(g)) ! A temporary array for RHO [kg m-3]
  real :: h(szi_(g),szj_(g),szk_(g))   ! A temporary array for thickness [H ~> m or kg m-2].
  real :: eta(szi_(g),szj_(g),szk_(g)+1) ! A temporary array for thickness [Z ~> m]
  real :: idamp(szi_(g),szj_(g))       ! The inverse damping rate [s-1].
  real :: s_ref, t_ref                 ! Reference salinity and temerature within surface layer
  real :: s_range, t_range             ! Range of salinities and temperatures over the vertical
  real :: e0(szk_(g)+1)             ! The resting interface heights [Z ~> m],
                                    ! usually negative because it is positive upward.
  real :: eta1d(szk_(g)+1)          ! Interface height relative to the sea surface
                                    ! positive upward [Z ~> m].
  real :: d_eta(szk_(g))            ! The layer thickness in a column [Z ~> m].
  real :: dome2d_width_bay, dome2d_width_bottom, dome2d_depth_bay
  real :: dome2d_west_sponge_time_scale, dome2d_east_sponge_time_scale
  real :: dome2d_west_sponge_width, dome2d_east_sponge_width
  real :: dummy1, x, z
  integer :: i, j, k, is, ie, js, je, isd, ied, jsd, jed, nz
 
  is = g%isc ; ie = g%iec ; js = g%jsc ; je = g%jec ; nz = g%ke
  isd = g%isd ; ied = g%ied ; jsd = g%jsd ; jed = g%jed
 
  call get_param(param_file, mdl, "DOME2D_WEST_SPONGE_TIME_SCALE", dome2d_west_sponge_time_scale, &
                 'The time-scale on the west edge of the domain for restoring T/S '//&
                 'in the sponge. If zero, the western sponge is disabled', &
                 units='s', default=0.)
  call get_param(param_file, mdl, "DOME2D_EAST_SPONGE_TIME_SCALE", dome2d_east_sponge_time_scale, &
                 'The time-scale on the east edge of the domain for restoring T/S '//&
                 'in the sponge. If zero, the eastern sponge is disabled', &
                 units='s', default=0.)
  call get_param(param_file, mdl, "DOME2D_WEST_SPONGE_WIDTH", dome2d_west_sponge_width, &
                 'The fraction of the domain in which the western sponge for restoring T/S '//&
                 'is active.', &
                 units='nondim', default=0.1)
  call get_param(param_file, mdl, "DOME2D_EAST_SPONGE_WIDTH", dome2d_east_sponge_width, &
                 'The fraction of the domain in which the eastern sponge for restoring T/S '//&
                 'is active.', &
                 units='nondim', default=0.1)
 
  ! Return if sponges are not in use
  if (dome2d_west_sponge_time_scale <= 0. .and. dome2d_east_sponge_time_scale <= 0.) return
 
  if (associated(csp)) call mom_error(fatal, &
     "DOME2d_initialize_sponges called with an associated control structure.")
  if (associated(acsp)) call mom_error(fatal, &
     "DOME2d_initialize_sponges called with an associated ALE-sponge control structure.")
 
  call get_param(param_file, mdl, "DOME2D_SHELF_WIDTH", dome2d_width_bay, &
                 default=0.1, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_BASIN_WIDTH", dome2d_width_bottom, &
                 default=0.3, do_not_log=.true.)
  call get_param(param_file, mdl, "DOME2D_SHELF_DEPTH", dome2d_depth_bay, &
                 default=0.2, do_not_log=.true.)
  call get_param(param_file, mdl,"S_REF",s_ref)
  call get_param(param_file, mdl,"T_REF",t_ref)
  call get_param(param_file, mdl,"S_RANGE",s_range,default=2.0)
  call get_param(param_file, mdl,"T_RANGE",t_range,default=0.0)
 
 
  ! Set the inverse damping rate as a function of position
  idamp(:,:) = 0.0
  do j=js,je ; do i=is,ie
    if (g%mask2dT(i,j) > 0.) then ! Only set damping rate for wet points
      x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon ! Non-dimensional position within domain (0,1)
      if ( dome2d_west_sponge_time_scale > 0. .and. x < dome2d_west_sponge_width ) then
        ! Within half the shelf width from the left edge
        dummy1 = 1. - x / dome2d_west_sponge_width
        idamp(i,j) = 1./dome2d_west_sponge_time_scale * max(0., min(1., dummy1))
      elseif ( dome2d_east_sponge_time_scale > 0. .and. x > ( 1. - dome2d_east_sponge_width ) ) then
        ! Within a quarter of the basin width from the right
        dummy1 = 1. - ( 1. - x ) / dome2d_east_sponge_width
        idamp(i,j) = 1./dome2d_east_sponge_time_scale * max(0., min(1., dummy1))
      else
        idamp(i,j) = 0.
      endif
    else
      idamp(i,j) = 0.
    endif
  enddo ; enddo
 
 
  if (use_ale) then
 
    ! Construct a grid (somewhat arbitrarily) to describe  the sponge T/S on
    do k=1,nz
     e0(k) = -g%max_depth * ( real(k-1) / real(nz) )
    enddo
    e0(nz+1) = -g%max_depth
    do j=js,je ; do i=is,ie
      eta1d(nz+1) = -g%bathyT(i,j)
      do k=nz,1,-1
        eta1d(k) = e0(k)
        if (eta1d(k) < (eta1d(k+1) + gv%Angstrom_Z)) then
          eta1d(k) = eta1d(k+1) + gv%Angstrom_Z
          h(i,j,k) = gv%Angstrom_H
        else
          h(i,j,k) = gv%Z_to_H * (eta1d(k) - eta1d(k+1))
        endif
      enddo
    enddo ; enddo
    ! Store the grid on which the T/S sponge data will reside
    call initialize_ale_sponge(idamp, g, param_file, acsp, h, nz)
 
    ! Construct temperature and salinity on the arbitrary grid
    t(:,:,:) = 0.0 ; s(:,:,:) = 0.0
    do j=js,je ; do i=is,ie
      z = -g%bathyT(i,j)
      do k = nz,1,-1
        z = z + 0.5 * gv%H_to_Z * h(i,j,k) ! Position of the center of layer k
        s(i,j,k) = 34.0 - 1.0 * (z/g%max_depth)
        if ( ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon < dome2d_west_sponge_width ) &
          s(i,j,k) = s_ref + s_range
        z = z + 0.5 *  gv%H_to_Z * h(i,j,k) ! Position of the interface k
      enddo
    enddo ; enddo
 
    if ( associated(tv%T) ) then
      call set_up_ale_sponge_field(t, g, tv%T, acsp)
    endif
    if ( associated(tv%S) ) then
      call set_up_ale_sponge_field(s, g, tv%S, acsp)
    endif
 
  else
 
    ! Construct interface heights to restore toward
    do j=js,je ; do i=is,ie
      eta1d(nz+1) = -g%bathyT(i,j)
      do k=nz,1,-1
        eta1d(k) = -g%max_depth * real(k-1) / real(nz)
        if (eta1d(k) < (eta1d(k+1) + gv%Angstrom_Z)) then
          eta1d(k) = eta1d(k+1) + gv%Angstrom_Z
          d_eta(k) = gv%Angstrom_Z
        else
          d_eta(k) = (eta1d(k) - eta1d(k+1))
        endif
      enddo
 
      x = ( g%geoLonT(i,j) - g%west_lon ) / g%len_lon
      if ( x <= dome2d_width_bay ) then
        do k=1,nz-1 ; d_eta(k) = gv%Angstrom_Z ; enddo
        d_eta(nz) = dome2d_depth_bay * g%max_depth - (nz-1) * gv%Angstrom_Z
      endif
 
      eta(i,j,nz+1) = -g%bathyT(i,j)
      do k=nz,1,-1
        eta(i,j,k) = eta(i,j,k+1) + d_eta(k)
      enddo
    enddo ; enddo
    call initialize_sponge(idamp, eta, g, param_file, csp, gv)
 
  endif
 
end subroutine dome2d_initialize_sponges
 
end module dome2d_initialization